Attachment 6070 Details for Bug 14337 – Код который я использовал для проверки

Код который я использовал для проверки

Arduino_test.ino (text/x-arduino), 1.39 KB, created by Artem Pribytkov on 2024-03-22 10:05:55 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Artem Pribytkov

Created: 2024-03-22 10:05:55 MSK

Size: 1.39 KB

patch

obsolete

>/*
>  Blink
>
>  Turns an LED on for one second, then off for one second, repeatedly.
>
>  Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
>  it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
>  the correct LED pin independent of which board is used.
>  If you want to know what pin the on-board LED is connected to on your Arduino
>  model, check the Technical Specs of your board at:
>  https://www.arduino.cc/en/Main/Products
>
>  modified 8 May 2014
>  by Scott Fitzgerald
>  modified 2 Sep 2016
>  by Arturo Guadalupi
>  modified 8 Sep 2016
>  by Colby Newman
>
>  This example code is in the public domain.
>
>  https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
>*/
>
>// the setup function runs once when you press reset or power the board
>void setup() {
>  // initialize digital pin LED_BUILTIN as an output.
>  pinMode(13, OUTPUT);
>  pinMode(11, OUTPUT);
>  pinMode(9, OUTPUT);
>  pinMode(10, OUTPUT);
>}
>
>// the loop function runs over and over again forever
>void loop() {
>  digitalWrite(13, HIGH);// turn the LED on (HIGH is the voltage level)
>  delay(1000);                       // wait for a second
>  analogWrite(9, 10);
>  digitalWrite(10, 255);
>  delay(1000);
>  digitalWrite(11, HIGH);
>  delay(1000);
>  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
>  delay(1000);
>  analogWrite(9, 0);
>  delay(1000);
> digitalWrite(11, 0);
> digitalWrite(10, 0);
>}

Actions: View

Attachments on bug 14337: 6043 | 6044 | 6045 | 6069 | 6070 | 6071