Bug 5043 - Arduino program did not start.
: Arduino program did not start.
Status: IN_PROGRESS
Product: Desktop Bugs
Classification: ROSA Desktop
Component: Main Packages
: Fresh
: x86_64 Linux
: Normal normal
: ---
Assigned To: ROSA Linux Bugs
: ROSA Linux Bugs
:
Depends on:
Blocks:
  Show dependency treegraph
 
Reported: 2015-02-10 23:37 MSK by pavel
Modified: 2016-11-20 14:30 MSK (History)
4 users (show)

See Also:
RPM Package: arduino-1.0.5-6-rosa2014.1.noarch
ISO-related:
Bad POT generating:
Upstream:


Attachments

Note You need to log in before you can comment on or make changes to this bug.
Description pavel 2015-02-10 23:37:15 MSK
Добрый день!
Раньше год или два года назад, я программировал arduino uno R3 через Rosa FRESH. Теперь arduino-1.0.5-6-rosa2014.1.noarch ghjcbn прописать пользователя в группы (некоторые существуют, но группу local - приходится создавать вручную). А потом программа в лучшем случае запускается, но не дает выбрать Serial port (чтобы прошить плату arduino). А в моем случае она вообще перестала запускаться...

Помогите, пожалуйста исправить ошибку.

Ниже основная информация о системе и ошибке:

[pavel@dell-notebook ~]$ uname -a
Linux dell-notebook 3.14.25-nrj-desktop-1rosa #1 SMP PREEMPT Mon Nov 24 11:14:10 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
[pavel@dell-notebook ~]$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
08:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
[pavel@dell-notebook ~]$ lspci -vv
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
        Subsystem: Dell Device 0598
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: c0000000-c0ffffff
        Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Dell Device 0598
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at c1000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 4000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915
        Kernel modules: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
        Subsystem: Dell Device 0598
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at c1600000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Dell Device 0598
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at c1614000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Dell Device 0598
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c1619000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
        Subsystem: Dell Device 0598
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at c1610000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Prefetchable memory behind bridge: 00000000c1400000-00000000c14fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
        Memory behind bridge: c1500000-c15fffff
        Prefetchable memory behind bridge: 000000009fb00000-000000009fbfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
        Subsystem: Dell Device 0598
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at c1618000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci
        Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
        Subsystem: Dell Device 0598
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich
        Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Device 0598
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 41
        Region 0: I/O ports at 4088 [size=8]
        Region 1: I/O ports at 4094 [size=4]
        Region 2: I/O ports at 4080 [size=8]
        Region 3: I/O ports at 4090 [size=4]
        Region 4: I/O ports at 4060 [size=32]
        Region 5: Memory at c1617000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Dell Device 0598
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 19
        Region 0: Memory at c1615000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 4040 [size=32]
        Kernel modules: i2c_i801

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff) (prog-if ff)
        !!! Unknown header type 7f
        Kernel driver in use: radeon
        Kernel modules: radeon

07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
        Subsystem: Dell Device 0598
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 44
        Region 0: I/O ports at 2000 [size=256]
        Region 2: Memory at c1404000 (64-bit, prefetchable) [size=4K]
        Region 4: Memory at c1400000 (64-bit, prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: r8169
        Kernel modules: r8169

08:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
        Subsystem: Dell Device 0209
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at c1500000 (64-bit, non-prefetchable) [size=512K]
        Expansion ROM at 9fb00000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k
        Kernel modules: ath9k

[pavel@dell-notebook ~]$ ps -aux | grep arduino
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
pavel     8645 12.2  1.4 3816828 58724 ?       Sl   12:26   0:02 java -Dswing.defaultlaf=com.sun.java.swing.plaf.gtk.GTKLookAndFeel -classpath /usr/bin/build-classpath: error: JAVAVER_LIBDIR /usr/share/java-1.8.0 does not exist or is not a directory::/usr/share/arduino/core.jar:/usr/share/arduino/pde.jar processing.app.Base
pavel     9006  0.0  0.0  24036  1136 pts/1    S+   12:26   0:00 grep --color arduino
Comment 1 Denis Silakov 2015-02-11 11:23:35 MSK
*** Bug 5042 has been marked as a duplicate of this bug. ***
Comment 2 pavel 2015-02-12 17:31:49 MSK
Okey! Could you choose one of my bugs and try to resolve it. Now all of them are duplicate.
In the forum of ROSALAB they said that it is the bug of the packadge arduino-1.0.5-6-rosa2014.1.noarch. The problem whith sending code from program to Arduino by usb-port becouse Serial port in the Service menu is not active.
Comment 3 Denis Silakov 2015-02-12 18:01:26 MSK
Для начала посмотрите, что у вас установлено из пакетов ecj:

# rpm -qa | grep ecj

Если ввыводе этой команды есть "eclipse-ecj", то надо насильственно поставить просто ecj ("urpmi ecj").

Потом стоит посмотреть, как ведет себя программа, если запустить ее из-под root. У меня в этом случае пункт "Serial ports" активен. Но я, к сожалению, не разбираюсь в arduino и не могу сказать, работает ли он как надо.

А под обычном пользователем это меню действительно неактивно, хотя в нужные группы он вроде добавляется.
Comment 4 pavel 2015-02-12 23:39:20 MSK
[root@dell-notebook ~]# rpm -qa | grep ecj
ecj-4.3-3-rosa2014.1.noarch

Запустить из под root`а в консоли? Не получается а в Иксы под рутом не пускает.

[root@dell-notebook ~]# arduino
No protocol specified
Exception in thread "main" java.awt.AWTError: Can't connect to X11 window server using ':0' as the value of the DISPLAY variable.
        at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
        at sun.awt.X11GraphicsEnvironment.access$200(X11GraphicsEnvironment.java:65)
        at sun.awt.X11GraphicsEnvironment$1.run(X11GraphicsEnvironment.java:115)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:74)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:259)
        at java.awt.GraphicsEnvironment.createGE(GraphicsEnvironment.java:102)
        at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:81)
        at sun.awt.X11.XToolkit.<clinit>(XToolkit.java:122)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:259)
        at java.awt.Toolkit$2.run(Toolkit.java:872)
        at java.awt.Toolkit$2.run(Toolkit.java:865)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:864)
        at java.awt.SystemColor.updateSystemColors(SystemColor.java:470)
        at java.awt.SystemColor.<clinit>(SystemColor.java:462)
        at processing.app.Preferences.init(Preferences.java:273)
        at processing.app.Base.main(Base.java:117)

[root@dell-notebook ~]# ps -aux | grep arduino
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
pavel    13266  0.4  1.5 3818004 61372 ?       Sl   22:26   0:03 java -Dswing.defaultlaf=com.sun.java.swing.plaf.gtk.GTKLookAndFeel -classpath /usr/bin/build-classpath: error: JAVAVER_LIBDIR /usr/share/java-1.8.0 does not exist or is not a directory::/usr/share/arduino/core.jar:/usr/share/arduino/pde.jar processing.app.Base
root     19658  0.0  0.0  24040  1124 pts/1    S+   22:38   0:00 grep --color arduino
Comment 5 Denis Silakov 2015-02-12 23:47:30 MSK
(In reply to comment #4)
> Запустить из под root`а в консоли? Не получается а в Иксы под рутом не
> пускает.

А вы как на рута переключаетесь? Просто "su"? Попробуйте "su -", должно помочь.
Comment 6 pavel 2015-02-14 14:57:19 MSK
После запуска программы из под root из консоли, появляется запрос открыть папку, далее программа не запускается (не важно как в консоле был выбран root - через su или su -:
[pavel@dell-notebook ~]$ su
Пароль: 
[root@dell-notebook pavel]# arduino
Exception in thread "main" java.lang.NoClassDefFoundError: gnu/io/CommPortIdentifier
        at processing.app.Editor.populateSerialMenu(Editor.java:989)
        at processing.app.Editor.buildToolsMenu(Editor.java:692)
        at processing.app.Editor.buildMenuBar(Editor.java:477)
        at processing.app.Editor.<init>(Editor.java:206)
        at processing.app.Base.handleOpen(Base.java:705)
        at processing.app.Base.handleOpen(Base.java:670)
        at processing.app.Base.handleNew(Base.java:566)
        at processing.app.Base.<init>(Base.java:306)
        at processing.app.Base.main(Base.java:195)
Caused by: java.lang.ClassNotFoundException: gnu.io.CommPortIdentifier
        at java.net.URLClassLoader$1.run(URLClassLoader.java:372)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:361)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:360)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
        ... 9 more
Comment 7 pavel 2015-02-14 14:58:09 MSK
Пробовал переустановить arduino и java -не помогло результат приведен сообщением выше.
Comment 8 Andrey Ponomarenko 2015-02-17 23:22:17 MSK
Сразу после попытки запуска программы запустите:

su; hw-probe -all -upload -id PC_NAME

Посмотрим логи.
Comment 9 Denis Silakov 2015-02-17 23:50:15 MSK
(In reply to comment #7)
> Пробовал переустановить arduino и java -не помогло результат приведен
> сообщением выше.

Как переустанавливали? Судя по логу, не находятся файлы из пакета rxtx. Возможно, его тоже переустановить надо.

На свежеустановленной системе, где не было ни arduino, ни rxtx, свежепоставленный arduino от root работает.
Comment 10 pavel 2015-02-23 22:11:12 MSK
Переустановил систему с R5 на R4.
[root@dell-notebook:pavel# uname -a
Linux dell-notebook.zybkin.com 3.14.33-nrj-desktop-1rosa #1 SMP PREEMPT Wed Feb 11 09:34:10 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

[root@dell-notebook:pavel# arduino
WARNING:  RXTX Version mismatch
        Jar version = RXTX-2.2
        native lib Version = RXTX-2.2pre2

arduino запускается, при выборе Serial port -> что-то выбрано, но при попытке прошить arduino выходит сообщение:
...no board selected...

почему-то нет возможности выбора платы и программатора.
Comment 11 Denis Silakov 2016-11-20 14:30:35 MSK
*** Bug 5153 has been marked as a duplicate of this bug. ***